gearblue gearblue
The tester is used to simulate a particular impulse (1.2 / 50 microsecond) so as to assess the insulation characteristics of a breaker against a real world impulse experienced by the MCCB

Impulse Tester (( a) Low Voltage Switchgear and Control gear: IS / IEC 60947 -2004 Cl. No:, b) Circuit Breakers: IS/IEC 60898:2002 & 97.6.2, c) RCCBs & MCBs: IEC 61008 & 61009: 9.20 d) IEC 61180))

Lab Test

Testing as per IEC 61180, IEC 61008-1, IEC 60335, IEC 60950, IEC 60947 The Impulse Voltage Test Equipment is designed to generate voltage impulse of 12kV (as per model) (both pola rities, settable). The wave form generated has a rise time of 1.2 micro second and 50 micro second duration. This test is described in various standards including IEC 61180.

Products From Same Category

The MCB Thermal Trip Calibration Test Bench is a fully automatic stand alone equipment
4 Station Thermal & Calibration Test Bench
This is designed for Testing of MCB to carry out “Test of Instantaneous Tripping
MCB Magnetic (Instantaneous) Trip Test Bench
The 28 days Test Bench can work in single as well as three phase mode
3-Phase-28-Days Temp-Rise-Test
It is a programmable High Voltage Tester for MCB equipments
The test bench tests mechanical and electrical endurance characteristics of MCB for quality assessment purposes
MCB Endurance Test Bench
The test is intended to check the instantaneous trip (magnetic trip mechanism) characteristics of an MCB as per its rating and curve at a conveniently low voltage
The test, similar to that of an MCB, is carried out to measure the power loss across each pole
MCB Temperature Rise and Power Loss Test Bench
The tester is used to carry out the 1.13 and 1.45 test, optionally inside a heated environment (temperature chamber)
MCB Tripping Current Characteristic Test Bench
The test bench is primarily designed to hold and connect multi pole MCBs for thermal verification
This product is used by leading MCB manufacturers on their lab & production floor
Glow Wire Test Apparatus – GWT A2 (Automatic)
Glow Wire Test Apparatus – GWT A2 (Automatic)
The product is used to measure the millivolt drop at a high dc voltage or to assess the micro-ohms of an MCB
millivolt drop tester